Ronseal Interior Varnish will provide a beautiful natural finish for doors, skirting, tables and other furniture around the home. Diamond hard protection will provide a superior resistance against scratches, knocks and scuffs. Key FeaturesDiamond hard protectionTouch dry - 20 Minutes1 Hour re-coat Surface Preparation Bare Wood Ensure all surfaces are free from wax, grease and oil by wiping with a cloth dampened in white spirit. Sand smooth with 120 grit sandpaper, (DO NOT use steel wool). Remove dust with a damp cloth and allow to dry thoroughly. Varnished Wood Ensure all surfaces are free from wax, grease and oil by wiping with a cloth dampened in white spirit. Remove any loose, flaking or peeling coatings, sand well with 120 grit sandpaper to a uniformed appearance. Remove dust with a damp cloth and allow to dry thoroughly. Recommended Systems Apply in a warm and well ventilated room, stir thoroughly before and during use. Using a good quality brush designed for water based finishes, apply evenly in the direction of the grain. It's recommended to apply 2-3 coats, leaving 1 hour between them, before the final coat lightly rub down using 240 grit and wipe with a damp cloth.